Skip to content

Borah Creek 3

Bowen, Queensland

Borah Creek 3 is a petroleum well in the Bowen, Queensland, operated by Hartogen, drilled to a total depth of 1,525 m.

Request LAS Files & Well Summary

Well Information

Well Name
Borah Creek 3
Basin
Bowen
State
Queensland
Classification
NAFE
Operator
Hartogen
Driller
Richter

Drilling Data

Total Depth
1,525 m
Datum Elevation
267.0 m
Spud Date
13/09/1982
Completion Date
25/09/1982
Permit
PL 14

Location

Latitude
-27.1183
Longitude
148.8733

Available Log Data

1
Log Streams
25
Curves
119,246
Data Points
18,175
Metres

Caliper (4 curves)

Borehole diameter measurements indicating hole condition and washout zones.

Curve Start End Interval
CAL1 1222 m 1525 m 303 m
CAL2 1222 m 1525 m 303 m
CALI 153 m 1511 m 1358 m
CALS 1219 m 1524 m 304 m

Density (5 curves)

Bulk density measurements for porosity calculation and lithology identification.

Curve Start End Interval
DRHO 1222 m 1524 m 302 m
FCNL 1222 m 1524 m 302 m
FFDL 1222 m 1524 m 302 m
NFDC 1222 m 1524 m 302 m
RHOB 1222 m 1527 m 304 m

GR (3 curves)

Well log curves recorded during wireline logging operations.

Curve Start End Interval
GR 153 m 1513 m 1360 m
GR1 1222 m 1519 m 297 m
GR2 1222 m 1524 m 302 m

Logging Parameters (2 curves)

Well log curves recorded during wireline logging operations.

Curve Start End Interval
TENS 153 m 1527 m 1374 m
TENS1 1222 m 1527 m 305 m

Miscellaneous (1 curves)

Well log curves recorded during wireline logging operations.

Curve Start End Interval
DEPT 153 m 1527 m 1374 m

Neutron (2 curves)

Porosity measurements derived from neutron or density tools, indicating reservoir storage capacity.

Curve Start End Interval
NCNL 1222 m 1524 m 302 m
NPHI 1222 m 1524 m 301 m

Resistivity (6 curves)

Electrical resistivity logs used to evaluate fluid content and identify hydrocarbon-bearing zones.

Curve Start End Interval
CILD 163 m 1524 m 1360 m
ILD 163 m 1524 m 1360 m
ILM 162 m 1525 m 1363 m
LL8U 163 m 1525 m 1362 m
MINV 1222 m 1524 m 302 m
MNOR 1222 m 1524 m 302 m

Sonic (1 curves)

Acoustic travel time logs used for porosity estimation and seismic calibration.

Curve Start End Interval
DT 160 m 1517 m 1357 m

SP (1 curves)

Spontaneous potential logs measuring natural electrical potentials for permeability indication.

Curve Start End Interval
SP 163 m 1524 m 1360 m