Yandina 2
Yandina 2 is a petroleum well in the Bowen, Queensland, operated by Santos, drilled to a total depth of 707 m.
Well Information
Drilling Data
- Total Depth
- 707 m
- Datum Elevation
- 208.4 m
- Spud Date
- 24/08/1998
- Completion Date
- 01/09/1998
- Permit
- ATP 337 P
- Rig
- Rig 1
Location
- Latitude
- -24.1886
- Longitude
- 148.5090
Available Log Data
Other (6 curves)
Well log curves recorded during wireline logging operations.
| Curve | Start | End | Interval |
|---|---|---|---|
| DTEM | 579 m | 703 m | 123 m |
| FPEF | 605 m | 703 m | 98 m |
| GR6 | 573 m | 696 m | 123 m |
| GRFE | 496 m | 700 m | 204 m |
| LGD | 575 m | 701 m | 126 m |
| UGD | 574 m | 700 m | 125 m |
Caliper (6 curves)
Borehole diameter measurements indicating hole condition and washout zones.
| Curve | Start | End | Interval |
|---|---|---|---|
| CALD | 598 m | 703 m | 104 m |
| CALD | 598 m | 703 m | 104 m |
| CALI | 168 m | 604 m | 436 m |
| CALI | 160 m | 605 m | 445 m |
| CALI | 160 m | 605 m | 445 m |
| CALI | 159 m | 598 m | 439 m |
Density (9 curves)
Bulk density measurements for porosity calculation and lithology identification.
| Curve | Start | End | Interval |
|---|---|---|---|
| DRHO | 605 m | 703 m | 98 m |
| DRHO | 161 m | 605 m | 444 m |
| FCNL | 158 m | 603 m | 445 m |
| LDEN | 160 m | 606 m | 445 m |
| PEDF | 160 m | 605 m | 444 m |
| PEDN | 161 m | 605 m | 444 m |
| RHOB | 605 m | 703 m | 98 m |
| RHOB | 161 m | 605 m | 444 m |
| SDEN | 160 m | 606 m | 445 m |
GR (5 curves)
Well log curves recorded during wireline logging operations.
| Curve | Start | End | Interval |
|---|---|---|---|
| GR | 585 m | 697 m | 111 m |
| GR | 5 m | 603 m | 598 m |
| GR | 155 m | 600 m | 445 m |
| GR | 155 m | 600 m | 444 m |
| GR5 | 595 m | 700 m | 105 m |
Logging Parameters (2 curves)
Well log curves recorded during wireline logging operations.
| Curve | Start | End | Interval |
|---|---|---|---|
| TSS1 | 7 m | 606 m | 598 m |
| TSS2 | 160 m | 606 m | 445 m |
Miscellaneous (3 curves)
Well log curves recorded during wireline logging operations.
| Curve | Start | End | Interval |
|---|---|---|---|
| DEPTH | -3 m | 703 m | 707 m |
| DEPTH | 1 m | 703 m | 702 m |
| TIME | 153 m | 606 m | 452 m |
Neutron (5 curves)
Porosity measurements derived from neutron or density tools, indicating reservoir storage capacity.
| Curve | Start | End | Interval |
|---|---|---|---|
| NCNL | 158 m | 603 m | 445 m |
| NPHI | 590 m | 699 m | 109 m |
| NPHI | 158 m | 603 m | 444 m |
| NPHI | 158 m | 602 m | 443 m |
| NPHI | 158 m | 603 m | 445 m |
Resistivity (10 curves)
Electrical resistivity logs used to evaluate fluid content and identify hydrocarbon-bearing zones.
| Curve | Start | End | Interval |
|---|---|---|---|
| ILD | 606 m | 702 m | 96 m |
| ILM | 606 m | 703 m | 96 m |
| LLD | 168 m | 601 m | 433 m |
| LLS | 168 m | 601 m | 433 m |
| MINV | 168 m | 601 m | 433 m |
| MLL | 168 m | 601 m | 433 m |
| MNOR | 168 m | 601 m | 433 m |
| TEMP | 578 m | 703 m | 125 m |
| TEMP | 1 m | 599 m | 598 m |
| TW | 160 m | 606 m | 445 m |
Sonic (5 curves)
Acoustic travel time logs used for porosity estimation and seismic calibration.
| Curve | Start | End | Interval |
|---|---|---|---|
| DT | 165 m | 594 m | 428 m |
| TT1 | -3 m | 594 m | 598 m |
| TT2 | -3 m | 594 m | 598 m |
| TT3 | -3 m | 594 m | 598 m |
| TT4 | -3 m | 594 m | 598 m |
SP (1 curves)
Spontaneous potential logs measuring natural electrical potentials for permeability indication.
| Curve | Start | End | Interval |
|---|---|---|---|
| SP | 168 m | 586 m | 418 m |