Toolachee 10

Toolachee 10 is a petroleum well in the Cooper, South Australia, operated by Santos, drilled to a total depth of 2,315 m.

Request LAS Files & Well Summary

Well Information

Well Name: Toolachee 10
Basin: Cooper
State: South Australia
Classification: NDOD
Operator: Santos
Driller: ODE

Drilling Data

Total Depth: 2,315 m
Datum Elevation: 65.5 m
Spud Date: 14/09/1982
Completion Date: 07/10/1982
Permit: -
Rig: National 55 Rig 6

Location

Latitude: -28.4411
Longitude: 140.8070

Available Log Data

Log Streams

Curves

180,184

Data Points

27,460

Metres

Caliper (3 curves)

Borehole diameter measurements indicating hole condition and washout zones.

Curve	Start	End	Interval
CALI	249 m	2316 m	2066 m
CALI	1256 m	2308 m	1052 m
CALI	1255 m	2315 m	1059 m

Density (3 curves)

Bulk density measurements for porosity calculation and lithology identification.

Curve	Start	End	Interval
DRHO	1255 m	2317 m	1061 m
PEF	1255 m	2317 m	1061 m
RHOB	1255 m	2317 m	1061 m

GR (3 curves)

Well log curves recorded during wireline logging operations.

Curve	Start	End	Interval
GR	15 m	2306 m	2291 m
GR	249 m	2303 m	2054 m
GR	1255 m	2308 m	1053 m

Miscellaneous (1 curves)

Well log curves recorded during wireline logging operations.

Curve	Start	End	Interval
DEPTH	15 m	2317 m	2301 m

Neutron (1 curves)

Porosity measurements derived from neutron or density tools, indicating reservoir storage capacity.

Curve	Start	End	Interval
NPHI	1255 m	2312 m	1057 m

Resistivity (3 curves)

Electrical resistivity logs used to evaluate fluid content and identify hydrocarbon-bearing zones.

Curve	Start	End	Interval
LLD	251 m	2313 m	2061 m
LLS	251 m	2313 m	2061 m
MSFL	1256 m	2308 m	1051 m

Sonic (2 curves)

Acoustic travel time logs used for porosity estimation and seismic calibration.

Curve	Start	End	Interval
DT	253 m	2312 m	2059 m
DTL	253 m	2312 m	2059 m

SP (1 curves)

Spontaneous potential logs measuring natural electrical potentials for permeability indication.

Curve	Start	End	Interval
SP	253 m	2300 m	2046 m